Infinix Hot 30i X669 MDM Remove Firmware Tested File

This guide explains how to safe flashing remove without IMEI editing MDM from the Infinix Hot 30i X669using original firmware files. Includes a verified file list, flashing instructions, and critical warnings to avoid bricking your device. Perfect for technicians and advanced users.

Introduction to MDM Removal on Infinix Hot 30i X669

The Infinix Hot 30i X669 often comes with pre-installed MDM software for enterprise management. This guide uses the Infinix X669C MDM Remove (Just Flashing) X669C-H6127AxAyBe-S-TR-230824V1056.rar firmware package to safely flash the device without modifying IMEI or critical partitions.

Required Files & Tools

The firmware package contains these critical files:

• MT6789_Android_scatter.txt (Flash configuration file)
• preloader_x6837_h897.bin (Bootloader file)
• super.img (Main system partition – 6.9GB packed)
• boot.img & vendor_boot.img (Kernel partitions)
• userdata.img (Factory reset file)

Tools Needed:

1. SP Flash Tool (v5.2208 recommended)
2. Tecno Flash Tool
3. USB Drivers: Install MediaTek USB Drivers.
4. 7-Zip (for RAR extraction)

Step-by-Step Flashing Guide

Step 1: Preparation

1. Backup all data (flashing erases internal storage)
2. Disable antivirus to prevent false positives
3. Extract Infinix X669C MDM Remove (Just Flashing) X669C-H6127AxAyBe-S-TR-230824V1056.rar

Step 2: Configure SP Flash Tool

1. Open MT6789_Android_scatter.txt in SP Flash Tool
2. Select Firmware Upgrade mode
3. UNCHECK: proinfo.bin, efuse.img, and tzfv.img to preserve IMEI

Step 3: Flashing Process

1. Power off the device
2. Click Download in SP Flash Tool
3. Connect device via USB (auto-detection starts)
4. Wait for green checkmark (5-8 minutes)

Critical Warnings

• 🔴 DO NOT INTERRUPT during super.img flashing
• Use original USB cable to avoid disconnection
• Verify firmware version matches device model (X669)

Post-Flash Steps

1. Perform factory reset via recovery mode
2. Skip Google account login (MDM remnants may trigger FRP)
3. Confirm IMEI intact via *#06#

Conclusion

This method successfully removes MDM while maintaining stock functionality. The 18.9MB compressed firmware includes all necessary partitions for a clean install. Always double-check file hashes to avoid corrupted flashes.

⚠️ Disclaimer: Flashing voids warranty. Proceed at your own risk.

Need Help?
Join our Infinix Support Forum for real-time assistance with firmware flashing.