Infinix Hot 50i X6531B Repair IMEI Original in Meta Mode [All Security] (Modem File)

Struggling with network issues on your Infinix Hot 50i X6531B after an IMEI corruption? This guide provides a 100% working method to repair the IMEI using the original Modem File in Meta Mode. We cover prerequisites, step-by-step instructions, and security tips to ensure a safe repair process.

Why Repair IMEI on Infinix Hot 50i?

The IMEI is critical for network connectivity. Corruption or loss can result in:

• No SIM detection
• Invalid baseband version
• Network signal drops

Prerequisites for IMEI Repair

1. Tools Required:

• DFT Tool (latest version)
• Original X6531B Modem File (avoid third-party files)
• Infinix USB Drivers
• Backup device data (recommended)

1. Enter Meta Mode:

• Dial *#*#3646633#*#* to access Engineering Mode.
• Navigate to Meta Mode under Connectivity.

Step-by-Step IMEI Repair Guide

Step 1: Connect Device to SPD Research Tool

• Launch DFTPro Tool on your PC.
• Connect your Infinix Hot 50i in Meta Mode via USB.

Step 2: Load Modem File

• Click Write IMEI > Load Modem File.
• Select the original X6531B_MODEM.bin file.

Step 3: Write IMEI and NVRAM Data

• Enter the original 15-digit IMEI (check under the battery or box).
• Enable All Security mode to bypass FRP locks.
• Click Start to flash the Modem File.

Step 4: Reboot and Verify

• Disconnect the device and reboot.
• Dial *#06# to confirm the IMEI matches the original.

Troubleshooting Common Issues

• “Modem File Not Found”: using the X6531B-specific file.
• USB Connection Drops: Reinstall Infinix drivers or try another port.
• Invalid IMEI: Double-check the IMEI format (15 digits, no letters).

Final Recommendations

Bookmark this firmware package for future repairs. Share your flashing experience in the comments below and help other Smart 9 users recover their devices!

Need Help?
Join our Infinix Support Forum for real-time assistance with firmware flashing.