How to Use Preloader.bin File for Infinix Hot 10 Play X688B-X688C FRP Reset, Factory Reset,

Stuck with FRP locks or software errors on your MediaTek Helio G35 Infinix Hot 10 Play X688B/X688C? This guide provides a detailed method to reset your device using the preloader.bin file. Discover safe steps for FRP removal, factory reset, and firmware restoration without compromising hardware integrity.

What is the Preloader.bin File?

The preloader.bin is a critical firmware component for MediaTek Helio G35 chipset devices like the Infinix Hot 10 Play. It initializes hardware during boot and is used to bypass FRP, restore firmware, or fix bootloop issues.

Prerequisites

1. Required Files:

• Infinix Hot 10 Play X688B-X688C Firmware: Ensure compatibility with your model.
• SP Flash Tool: For flashing preloader.bin (v5.2208 or newer).
• USB Drivers: Install MediaTek USB Drivers.
• preloader.bin File: Included in the attached ZIP.

1. Backup Data: This process erases all data.
2. Charge the device to 50% minimum.

Step-by-Step Guide for FRP Reset and Factory Reset

Step 1: Prepare SP Flash Tool

1. Extract the firmware folder and open SP Flash Tool.
2. Load the scatter file (MT6765_Android_scatter.txt) from the firmware folder.

Step 2: Select Preloader.bin

1. In SP Flash Tool, check Only Preloader under the “Download” tab.
2. Replace the existing preloader.bin with the file from the ZIP.

Step 3: Connect Your Device

1. Power off the phone.
2. Remove the battery (if removable) or press Volume Down + Power for 10 seconds.
3. Connect the device to your PC via USB. SP Flash Tool will detect it in Preloader Mode.

Step 4: Start Flashing

1. Click Download in SP Flash Tool.
2. Wait until the green checkmark appears (5-10 seconds).

Step 5: Factory Reset

1. Disconnect the device.
2. Boot into Recovery Mode (Volume Up + Power).
3. Select Wipe Data/Factory Reset.

Rewriting Firmware Using Preloader.bin

If your device is bricked:

1. In SP Flash Tool, load the full firmware via the scatter file.
2. Ensure preloader.bin is selected.
3. Click Download and reconnect the device.
4. After flashing, reboot the phone.

Important Notes

• ⚠️ Use the correct preloader.bin: Mismatched files can hard-brick the device.
• ⚠️ Avoid interrupting the process: Disconnections may corrupt NAND memory.
• This method only works for MediaTek-based Infinix Hot 10 Play models.

Conclusion

The preloader.bin file is essential for low-level repairs on the Infinix Hot 10 Play X688B-X688C. Follow this guide carefully to reset FRP, restore firmware, or fix software crashes. For advanced issues, consult a technician.

Need Help?
Join our Infinix Support Forum for real-time assistance with firmware flashing.